'Declaration
 
Public MustOverride Sub synthetize_hpf( _
   ByVal lowSig As System.Object, _
   ByVal lowOff As System.Integer, _
   ByVal lowLen As System.Integer, _
   ByVal lowStep As System.Integer, _
   ByVal highSig As System.Object, _
   ByVal highOff As System.Integer, _
   ByVal highLen As System.Integer, _
   ByVal highStep As System.Integer, _
   ByVal outSig As System.Object, _
   ByVal outOff As System.Integer, _
   ByVal outStep As System.Integer _
) 

public abstract void synthetize_hpf( 
   System.object lowSig,
   System.int lowOff,
   System.int lowLen,
   System.int lowStep,
   System.object highSig,
   System.int highOff,
   System.int highLen,
   System.int highStep,
   System.object outSig,
   System.int outOff,
   System.int outStep
)

Parameters

lowSig

This is the array that contains the low-pass input signal. It must be of the correct type (e.g., it must be int[] if getDataType() returns TYPE_INT).

lowOff

This is the index in lowSig of the first sample to filter.

lowLen

This is the number of samples in the low-pass input signal to filter.

lowStep

This is the step, or interleave factor, of the low-pass input signal samples in the lowSig array. See above.

highSig

This is the array that contains the high-pass input signal. It must be of the correct type (e.g., it must be int[] if getDataType() returns TYPE_INT).

highOff

This is the index in highSig of the first sample to filter.

highLen

This is the number of samples in the high-pass input signal to filter.

highStep

This is the step, or interleave factor, of the high-pass input signal samples in the highSig array. See above.

outSig

This is the array where the output signal is placed. It must be of the same type as lowSig and it should be long enough to contain the output signal.

outOff

This is the index in outSig of the element where to put the first output sample.

outStep

This is the step, or interleave factor, of the output samples in the outSig array. See above.

The input low-pass (high-pass) signal resides in the lowSig array. The index of the first sample to filter (i.e. that will generate the first (second) output sample). is given by lowOff (highOff). This array must be of the same type as the one for which the particular implementation works with (which is returned by the getDataType() method).

The low-pass (high-pass) input signal can be interleaved with other signals in the same lowSig (highSig) array, and this is determined by the lowStep (highStep) argument. This means that the first sample of the low-pass (high-pass) input signal is lowSig[lowOff] (highSig[highOff]), the second is lowSig[lowOff+lowStep] (highSig[highOff+highStep]), the third is lowSig[lowOff+2*lowStep] (highSig[highOff+2*highStep]), and so on. Therefore if lowStep (highStep) is 1 there is no interleaving. This feature allows to filter columns of a 2-D signal, when it is stored in a line by line order in lowSig (highSig), without having to copy the data, in this case the lowStep (highStep) argument should be the line width of the low-pass (high-pass) signal.

The output signal is placed in the outSig array. The outOff and outStep arguments are analogous to the lowOff and lowStep ones, but they apply to the outSig array. The outSig array must be long enough to hold the low-pass output signal.

Reference

SynWTFilter Class
SynWTFilter Members