[]
        
(Showing Draft Content)

GC.Spread.Sheets.Shapes.ConnectorShape

Class: ConnectorShape

Sheets.Shapes.ConnectorShape

Hierarchy

Table of contents

Constructors

Methods

Constructors

constructor

new ConnectorShape(worksheet, name, connectorType?, beginX?, beginY?, endX?, endY?)

Represents a ConnectorShape.

Parameters

Name Type Description
worksheet Worksheet The host sheet of the shape.
name string The name of shape.
connectorType? ConnectorType The type of the connector shape.
beginX? number The x location of the start point for the connector shape.
beginY? number The y location of the start point for the connector shape.
endX? number The x location of the end point for the connector shape.
endY? number The y location of the end point for the connector shape.

Overrides

ShapeBase.constructor

Methods

adjustments

adjustments(arrayValue?): any

Gets or sets the adjustment values of the connector shape.

example

var myConnector = sheet.shapes.addConnector("myConnector", GC.Spread.Sheets.Shapes.ConnectorType.elbow, 50, 50, 200, 500);
var adjustments = myConnector.adjustments();
console.log(adjustments);
adjustments = [-0.8];
myConnector.adjustments(adjustments);

Parameters

Name Type Description
arrayValue? number[] The adjustment values in array.

Returns

any

if no value is set, returns the current adjustment values of the shape.


allowMove

allowMove(value?): any

Gets or sets whether to disable moving the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.allowMove();
heart.allowMove(!state);

Parameters

Name Type Description
value? boolean The setting for whether to disable moving the shape.

Returns

any

If no value is set, returns the setting for whether to disable moving the shape.

Inherited from

ShapeBase.allowMove


allowResize

allowResize(value?): any

Gets or sets the resize mode of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.allowResize();
heart.allowResize(GC.Spread.Sheets.Shapes.ResizeMode.aspect);

Parameters

Name Type Description
value? boolean | ResizeMode The setting for whether to disable resizing the shape.

Returns

any

If no value is set, returns the setting for whether to disable resizing the shape.

Inherited from

ShapeBase.allowResize


allowRotate

allowRotate(value?): any

Gets or sets whether to disable rotating the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.allowRotate();
heart.allowRotate(!state);

Parameters

Name Type Description
value? boolean The setting for whether to disable rotating the shape.

Returns

any

If no value is set, returns the setting for whether to disable rotating the shape.

Inherited from

ShapeBase.allowRotate


alt

alt(value?): string | void

Gets or sets the alternative text of the shape for screen readers.

Parameters

Name Type Description
value? string The alternative text of the shape.

Returns

string | void

The alternative text of the shape.

Inherited from

ShapeBase.alt


canPrint

canPrint(value?): any

Gets or sets whether this shape is printable.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.canPrint();
heart.canPrint(!state);

Parameters

Name Type Description
value? boolean The value that indicates whether this shape is printable.

Returns

any

If no value is set, returns whether this shape is printable.

Inherited from

ShapeBase.canPrint


dynamicMove

dynamicMove(value?): any

Gets or sets whether the shape moves when hiding or showing, resizing, or moving rows or columns.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.dynamicMove();
heart.dynamicMove(!state);

Parameters

Name Type Description
value? boolean The value indicates whether the shape moves when hiding or showing, resizing, or moving rows or columns.

Returns

any

If no value is set, returns whether this shape dynamically moves.

Inherited from

ShapeBase.dynamicMove


dynamicSize

dynamicSize(value?): any

Gets or sets whether the size of the shape changes when hiding or showing, resizing, or moving rows or columns.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.dynamicSize();
heart.dynamicSize(!state);

Parameters

Name Type Description
value? boolean The value indicates whether the size of the shape changes when hiding or showing, resizing, or moving rows or columns.

Returns

any

If no value is set, returns whether this shape dynamically changes size.

Inherited from

ShapeBase.dynamicSize


endColumn

endColumn(value?): any

Gets or sets the end column index of the shape position.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.endColumn();
heart.endColumn(n + 1);

Parameters

Name Type Description
value? number The end column index of the shape position.

Returns

any

If no value is set, returns the end column index of the shape position.

Inherited from

ShapeBase.endColumn


endColumnOffset

endColumnOffset(value?): any

Gets or sets the offset relative to the end column of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.endColumnOffset();
heart.endColumnOffset(0);

Parameters

Name Type Description
value? number The offset relative to the end column of the shape.

Returns

any

If no value is set, returns the offset relative to the end column of the shape.

Inherited from

ShapeBase.endColumnOffset


endConnector

endConnector(connector?): IShapeConnector

Gets or sets the end connector info of the connectorShape.

example

var shape1 = sheet.shapes.add("myShape1", GC.Spread.Sheets.Shapes.AutoShapeType.rectangle, 62 * 9, 0, 200, 200);
var shape2 = sheet.shapes.addConnector("myShape", GC.Spread.Sheets.Shapes.ConnectorType.straight, 220, 120, 300, 120);
var endConnector = shape.endConnector();
shape2.endConnector({name: shape1.name(), index: 2});

Parameters

Name Type Description
connector? IShapeConnector The end connector info of the connectorShape.

Returns

IShapeConnector

connectorInfo - If no value is set, returns the end connector info of the connectorShape. When the connectorShape has no end connector returns null. connectorInfo.name The name of the end connector. connectorInfo.index The connect point index of the end connector. connectorInfo.shape The end connector.


endRow

endRow(value?): any

Gets or sets the end row index of the shape position.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.endRow();
heart.endRow(n + 2);

Parameters

Name Type Description
value? number The end row index of the shape position.

Returns

any

If no value is set, returns the end row index of the shape position.

Inherited from

ShapeBase.endRow


endRowOffset

endRowOffset(value?): any

Gets or sets the offset relative to the end row of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.endRowOffset();
heart.endRowOffset(0);

Parameters

Name Type Description
value? number The offset relative to the end row of the shape.

Returns

any

If no value is set, returns the offset relative to the end row of the shape.

Inherited from

ShapeBase.endRowOffset


getFormula

getFormula(path): string

Gets the formula string from the shape by the path.

example

sheet.name("Sheet1");
sheet.setValue(0, 1, "red");
var myConnector = sheet.shapes.addConnector("myConnector", GC.Spread.Sheets.Shapes.ConnectorType.elbow, 50, 50, 200, 500);
myConnector.setFormula("style.line.color", "=Sheet1!B1");
myConnector.getFormula("style.line.color");//returns "=Sheet1!B1"

Parameters

Name Type Description
path string The path which can accept a formula string, it could be one of "x", "y", "width", "height", "style.line.color", "style.line.lineStyle", "style.line.width", "style.line.capType", "style.line.joinType", "style.line.compoundType", "style.line.transparency".

Returns

string

Returns the formula string from the shape by the path.

Overrides

ShapeBase.getFormula


height

height(value?): any

Gets or sets the height of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.height();
heart.height(n + 50);

Parameters

Name Type Description
value? string | number The height of the shape specified by a number or formula (starts with =) can get a number value.

Returns

any

If no value is set, returns the height of the shape.

Inherited from

ShapeBase.height


hyperlink(value?): void | IHyperlink

Gets or sets the hyperlink of the shape.

example

var shape = sheet.shapes.add("myShape", GC.Spread.Sheets.Shapes.AutoShapeType.rectangle, 62 * 9, 0, 200, 200);
shape.hyperlink({url: "http://www.grapecity.com", target: 0, tooltip: 'goes to grapecity'});

Parameters

Name Type
value? IHyperlink

Returns

void | IHyperlink

If no value is set, returns the current hyperlink settings of the shape.

Inherited from

ShapeBase.hyperlink


isLocked

isLocked(value?): any

Gets or sets whether this shape is locked.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.isLocked();
heart.isLocked(!state);

Parameters

Name Type Description
value? boolean The value that indicates whether this shape is locked.

Returns

any

If no value is set, returns whether this shape is locked.

Inherited from

ShapeBase.isLocked


isSelected

isSelected(value?): any

Gets or sets whether this shape is selected.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.isSelected();
heart.isSelected(!state);

Parameters

Name Type Description
value? boolean The value that indicates whether this shape is selected.

Returns

any

If no value is set, returns whether this shape is selected.

Inherited from

ShapeBase.isSelected


isVisible

isVisible(value?): any

Gets or sets whether this shape is visible.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.isVisible();
heart.isVisible(!state);

Parameters

Name Type Description
value? boolean The value that indicates whether this shape is visible.

Returns

any

If no value is set, returns whether this shape is visible.

Inherited from

ShapeBase.isVisible


name

name(value?): any

Gets or sets the name of the shape.

example

var shape1 = sheet.shapes.add("myShape1", GC.Spread.Sheets.Shapes.AutoShapeType.rectangle, 62 * 9, 0, 200, 200);
var shape2 = sheet.shapes.add("myShape2", GC.Spread.Sheets.Shapes.AutoShapeType.rectangle, 20, 20, 200, 200);
var shape = sheet.shapes.group([shape1, shape2]);
shape.name("myGroupShape");
var shapeName = shape.name();

Parameters

Name Type Description
value? string The name of the shape.

Returns

any

If no value is set, returns the name of the shape.

Inherited from

ShapeBase.name


setFormula

setFormula(path, formula): void

Sets the formula string to the shape by the path.

example

sheet.name("Sheet1");
sheet.setValue(0, 1, "red");
var myConnector = sheet.shapes.addConnector("myConnector", GC.Spread.Sheets.Shapes.ConnectorType.elbow, 50, 50, 200, 500);
myConnector.setFormula("style.line.color", "=Sheet1!B1");

Parameters

Name Type Description
path string The path which can accept a formula string, it could be one of "x", "y", "width", "height", "style.line.color", "style.line.lineStyle", "style.line.width", "style.line.capType", "style.line.joinType", "style.line.compoundType", "style.line.transparency".
formula string The formula string.

Returns

void

Overrides

ShapeBase.setFormula


showHandle

showHandle(value?): boolean | void

Gets or sets whether to show handle of shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var state = heart.showHandle();
heart.showHandle(!state);

Parameters

Name Type Description
value? boolean The setting for whether to show handle of shape.

Returns

boolean | void

If no value is set, returns the setting for whether to show handle of shape.

Inherited from

ShapeBase.showHandle


startColumn

startColumn(value?): any

Gets or sets the starting column index of the shape position.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.startColumn();
heart.startColumn(n + 2);

Parameters

Name Type Description
value? number The starting column index of the shape position.

Returns

any

If no value is set, returns the starting column index of the shape position.

Inherited from

ShapeBase.startColumn


startColumnOffset

startColumnOffset(value?): any

Gets or sets the offset relative to the start column of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.startColumnOffset();
heart.startColumnOffset(0);

Parameters

Name Type Description
value? number The offset relative to the start column of the shape.

Returns

any

If no value is set, returns the offset relative to the start column of the shape.

Inherited from

ShapeBase.startColumnOffset


startConnector

startConnector(connector?): IShapeConnector

Gets or sets the start connector info of the connectorShape.

example

var shape1 = sheet.shapes.add("myShape1", GC.Spread.Sheets.Shapes.AutoShapeType.rectangle, 62 * 9, 0, 200, 200);
var shape2 = sheet.shapes.addConnector("myShape", GC.Spread.Sheets.Shapes.ConnectorType.straight, 220, 120, 300, 120);
var startConnector = shape.startConnector();
shape2.startConnector({name: shape1.name(), index: 2});

Parameters

Name Type Description
connector? IShapeConnector The start connector info of the connectorShape.

Returns

IShapeConnector

connectorInfo - If no value is set, returns the start connector info of the connectorShape. When the connectorShape has no start connector returns return null. connectorInfo.name The name of the start connector. connectorInfo.index The connect point index of the start connector. connectorInfo.shape The start connector.


startRow

startRow(value?): any

Gets or sets the starting row index of the shape position.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.startRow();
heart.startRow(n + 2);

Parameters

Name Type Description
value? number The starting row index of the shape position.

Returns

any

If no value is set, returns the starting row index of the shape.

Inherited from

ShapeBase.startRow


startRowOffset

startRowOffset(value?): any

Gets or sets the offset relative to the start row of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.startRowOffset();
heart.startRowOffset(0);

Parameters

Name Type Description
value? number The offset relative to the start row of the shape.

Returns

any

If no value is set, returns the offset relative to the start row of the shape.

Inherited from

ShapeBase.startRowOffset


style

style(value?): void | ShapeStyle

Gets or sets the style of the connector shape.

example

//This sample sets style for the connector shape.
var shape = sheet.shapes.addConnector("Shape1", GC.Spread.Sheets.Shapes.ConnectorType.straight, 100, 60, 200, 160);
var oldStyle = shape.style();
oldStyle.line.color = "red";
oldStyle.line.lineStyle = GC.Spread.Sheets.Shapes.PresetLineDashStyle.dashDot;
oldStyle.line.width = 5;
oldStyle.line.capType = GC.Spread.Sheets.Shapes.LineCapStyle.square;
oldStyle.line.joinType = GC.Spread.Sheets.Shapes.LineJoinStyle.miter;
oldStyle.line.compoundType = GC.Spread.Sheets.Shapes.CompoundType.double;
oldStyle.line.transparency = 0.5;
oldStyle.line.beginArrowheadStyle = GC.Spread.Sheets.Shapes.ArrowheadStyle.triangle;
oldStyle.line.beginArrowheadWidth = GC.Spread.Sheets.Shapes.ArrowheadWidth.narrow;
oldStyle.line.beginArrowheadLength = GC.Spread.Sheets.Shapes.ArrowheadLength.short;
oldStyle.line.endArrowheadStyle = GC.Spread.Sheets.Shapes.ArrowheadStyle.diamond;
oldStyle.line.endArrowheadWidth = GC.Spread.Sheets.Shapes.ArrowheadWidth.wide;
oldStyle.line.endArrowheadLength = GC.Spread.Sheets.Shapes.ArrowheadLength.long;
shape.style(oldStyle);

Parameters

Name Type Description
value? ShapeStyle The connector shape style.

Returns

void | ShapeStyle

If no value is set, returns the current style of the connector shape.


type

type(): ConnectorType

Gets the connector type of the connectorShape.

example

var shape = sheet.shapes.addConnector("myShape", GC.Spread.Sheets.Shapes.ConnectorType.straight, 220, 120, 300, 120);
var shapeName = shape.type();

Returns

ConnectorType

returns the connector type of the shape.


width

width(value?): any

Gets or sets the width of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.width();
heart.width(n + 50);

Parameters

Name Type Description
value? string | number The width of the shape specified by a number or formula (starts with =) can get a number value.

Returns

any

If no value is set, returns the width of the shape.

Inherited from

ShapeBase.width


x

x(value?): number | void

Gets or sets the horizontal location of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.x();
heart.x(n + 50);

Parameters

Name Type Description
value? string | number The horizontal location of the shape specified by a number or formula (starts with =) can get a number value.

Returns

number | void

If no value is set, returns the horizontal location of the shape.

Inherited from

ShapeBase.x


y

y(value?): any

Gets or sets the vertical location of the shape.

example

var heart = sheet.shapes.add("Shape1", GC.Spread.Sheets.Shapes.AutoShapeType.heart, 100, 60, 200, 160);
var n = heart.y();
heart.y(n + 50);

Parameters

Name Type Description
value? string | number The vertical location of the shape specified by a number or formula (starts with =) can get a number value.

Returns

any

If no value is set, returns the vertical location of the shape.

Inherited from

ShapeBase.y